EMC cable shield clamps, single
EMC cable clamps without mounting feet for an individual assembly via rivet.
? Shield clamps, single-
Products?EMC cable shield clamps
EMC cable clamps
EMI shielding & earthing components
For process measurement and control equipment an increasingly higher level of protection against failure is required. EMI shielding and earthing is very important. The area where the cable shield is connected to the cabinet earth is a critical point. It is very important that the connection has a low resistance. All icotek EMC cable clamps for shielding cable diameters from 1.5 to 75 mm have been tested utilising various frequency ranges and in all tests there was minimal leakage resistance. Find out more ?
Request your free product sampleicotek EMC solutions at a glance
EMC cable shield clamps for screw mounting
EMC cable clamps for direct mounting via screws, e.g. on metal sheets.
? Shield clamps for screw mounting
Split EMC cable entry systems, IP55
In case of conducted as well as field bound EMI disturbances, our split EMC cable entry systems offer an effective way to divert and block those disturbances.
EMC cable clamp assembly for screw mounting
EMC cable clamp assembly with shield clamps for EMI shielding of up to 12 lines.
? Clamp assembly for screw mounting
EMC cable shield clamps for 35 mm top hat DIN rails
EMC cable clamp for snap-on mounting on 35 mm top hat DIN rails.
? Shield clamps for 35 mm top hat DIN rails
EMC cable clamp assembly for 35 mm top hat DIN rails
EMC cable clamp assembly with shield clamps for EMI shielding of up to 12 lines.
? Clamp assembly for 35 mm top hat DIN rails
EMC cable shield clamps for C section rails C30
EMC cable clamp for mounting on C section rails C30.
? Shield clamps for C section rails
EMC shield clamps with cable clamps for C section rails C30
Convenient set consisting of EMC shield clamp LFC and matching cable clamp CCL.
EMC cable clamp assembly for C section rails C30
EMC cable clamp assembly with shield clamps for EMI shielding of up to 12 lines.
? Clamp assembly for C section rails
EMC cable shield clamps for bus bars
EMC cable clamps for snap-on mounting on 10 × 3 mm bus bars.
? Shield clamps for bus bars
EMC cable shield clamps, pluggable
EMC cable clamps with mounting claws for plugging onto metal sheet edges.
? Shield clamps, pluggable
EMC shield brackets with compression spring
EMC shield brackets with compression spring for screw mounting, top hat rails, C section rails or bus bars.
? Shield brackets with compression spring
Configure your individual EMC clamp assembly!
Configure your own custom EMC cable clamp assembly RLF or RLFZ in no time.
EMC cable shield clamps for PE conductors
EMC shield clamps on ring cable lugs for assembly on PE conductors.
? Shield clamps for PE conductors
EMC cable shield clamps on earthing tapes
Earthing tapes with fitted EMC cable shield clamps, with or without integrated cable fixing function.
? Shield clamps on earthing tapes
EMC cable shield clamps for decentralised bus modules
EMC cable clamps for EMI shielding on decentralised bus modules of numerous manufacturers.
? Shield clamps for bus modules
EMC cable shield clamps for printed circuit boards
EMC cable clamps with soldering feet for EMI shielding on printed circuit boards (PCB).
? Shield clamps for PCB
EMC ServiceBox
Assortment of SKL / MSKL shield clamps. Perfect for service calls and maintenance.
? EMC Service Boxes
EMC cable collector bracket for cable entry systems
EMC cable collectors with EMI shielding function for cable entry systems - for use with cable shield clamps PFS.
? EMC cable collector brackets
EMC cable collectors for cable entry systems
EMC cable collectors with EMI shielding function for cable entry systems - with integrated strain relief.
? EMC cable collectors
EMC cable collector for cable glands
EMC bracket for metric gable glands. The economic alternative to classic EMC glands.
? EMC cable bracket for cable glands
EMC strain relief plates
Cable collector plates for EMI shielding and strain relief. Various mounting types.
? EMC strain relief plates
Shield plates for ZL strain relief plates
EMC shielding plates for mounting on ZL strain relief plates.
? Shield plates for strain relief plates
Earthing tapes
Earthing tapes manufactured with highly flexible E-Cu stranded wires. Available in a variety of lengths and cross-sections.
? Earthing tapes
EMC cable shield clamps
Duration: 40 min.
More information
For process measurement and control equipment an increasingly higher level of protection against failure is required. EMI shielding and earthing is very important. The area where the cable shield is connected to the cabinet earth is a critical point. It is very important that the connection has a low resistance. All icotek EMC cable clamps for shielding cable diameters from 1.5 to 75 mm have been tested utilising various frequency ranges and in all tests there was minimal leakage resistance.
Info guide – everything you need to know about EMC solutions
Today’s industrial process technology is far more sensitive to electromagnetic disturbances creating the need for proper electromagnetic compatibility.
But what does that mean?
This video explains clearly why EMC is so important.
The EMC cable clamps offer a large contact area to the cable shield (see figure A). In comparison to conventional shielding brackets an up to 50% higher contact area can be achieved when using the SKL line (see figure B). The specified clamping range can be exceeded up to 10%.
SKL shield clamps are available in several mounting types like ? screw type mounting on metal plates or mounting them on ? DIN rails or ? bus bars. Properly sized and used in conjunction with cable ties, many EMC cable shielding products provide strain relief in accordance with BS EN 62444.
If you need to install a larger amount of cables and they have to be shielded in a relatively small space, icotek offers ? EMC clamp assemblies RLF and RLFZ, an efficient EMI shielding solution for up to 12 cables.
You can configure your own customised clamp assembly for your application with our ? EMC Configurator. Individually choose your shield clamp sizes and positions according to your cable diameters.
As an alternative to our EMI shielding clamps we also offer classic spring loaded shield brackets in various sizes and mounting types.
? EMC cable collectors for cable entry frames / ? cable glands as well as ? earthing tapes round up our wide range of EMC cable shielding products.
