DIN-RC 1
| Part No. | 80189 |
| EAN | 4251269324345 |
| Package quantity | 1 |
available
-
Products
?
Punch Drivers & DIN Rail Cutters
?
DIN-RC rail cutter
DIN-RC rail cutter
for DIN TS35 rails & bus bars, with length stop 1000 mm
The DIN-RC cutter cuts various DIN TS35 rails with little effort and accurately. The cut is clean and free of burrs; there is no waste.
The length stop with guiding device ensures that nothing slips while cutting and that the cut is always 90° at an exact angle. Thanks to the optimal power transmission of the cutting device, only little effort is required.
The DIN-RC 1 is suitable for cutting:
- DIN TS35 rails 35 x 7.5 mm
- DIN TS35 rails 35 x 15 mm
The DIN-RC 2 is suitable for cutting:
- DIN TS35 rails 35 x 7.5 mm
- DIN TS35 rails 35 x 15 mm
- DIN TS35 rails 15 x 5.5 mm
- Bus bars 10 x 3 mm
Not suitable for stainless steel rails!
Advantages & Benefits
- Cuts the most common TS35 DIN rails 35 x 7.5 mm, 35 x 15 mm and 15 x 5.5 mm as well as bus bars 10 x 3 mm
- Exact 90° cuts
- Burr-free cuts
- With length stop 1000 mm and guiding device
Product types & Sizes
DIN-RC 2
| Part No. | 80190 |
| EAN | 4251269323942 |
| Package quantity | 1 |
available
You Haven't Found Anything Suitable Yet?
Try the ProductFinderProduct Video
Convince yourself of the simple and time-saving use of our products.
Watch the product video!
DIN-RC 1: 0:00 - 0:52
DIN-RC 2: 0:53 - 1:37
Suitable for:
You might also be interested in the following products
Punch Drivers
Punch Driver Sets
Hydraulic punch driver for cut-outs on V2A stainless steel, sheet steel, aluminum or plastics. Suitable for round and rectangular punches. Also available with knockout die sets metric M16 - M63.
KEL-U | KEL-E
Split Cable Transit, UL Type 12 / IP54
KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Available as single or double row version.
CONFiX? FWS
Bulkhead Fitting for Cable Conduits
90° angled bulkhead fitting for routing corrugated cable conduits via conduit connector (FWS-A) or direct pickup (FWS-B).
KDR-ESR
Enclosure Gland Plate with Slide Frames, IP54
Enclosure gland plate with slide frames, suitable for KEL-U / KEL-QUICK / KEL-JUMBO cable entry frames.
KEL-DPZ round
Round Cable Entry Plate, UL Type 12/4X* / IP66/IP68
Round cable entry plate with certified sealing IP66/IP68 / UL Type 12/4X*. Metric threads M25-M63.
KEL-BES-S
Split Brush Plates for Cable Pass-Through
Suitable for cut-outs of heavy industrial connectors. Mounting via screws or expanding rivets.
KVT
Split Cable Gland, M20-M63, UL Type 12 / IP54
KT grommet based split cable gland for preassembled cables with metric thread sizes M20 / M25 / M32 / M40 / M50 / M63.