KEA 24 is a cable entry adapter for accommodating various icotek cable entry frames and plates of size 24. The adapter allows cables to be routed at a 90° angle. The installation direction can be horizontal or vertical. The cables are protected against mechanical tension in the entry and exit areas. Wall mounting is done either with screws and nuts or by using threaded bushings. A suitable wall seal is included in the scope of delivery. icotek also offers suitable punches for the cut-out.
The cable entry plates KEL-DP 24 Type B can be easily snapped onto the KEA 24 W90 R. The cable entry frames KEL 24, KEL-U 24, KEL-ER 24 and the cable entry plates KEL-DPZ 24 and KEL-DPU 24 can be screwed onto the KEA 24 W90 S. This enables the insertion of pre-assembled and non-assembled cables.
Protection class (KEA + ...):
| IP rating (EN 60529) | IP54, IP65, IP66 |
| Flame class | UL94-V0, self-extinguishing |
| Operating temperature | -40 C° to 120 C° |
| Material | Polyamide |
| Mounting options | Screw type mounting, Snap-in |
| Properties | vibration proof, silicone free, halogen free |
| Part No. | 48301 |
| EAN | 4251269334658 |
| Package quantity | 1 |
| Mounting options | Screw type mounting, Snap-in |
| Length | 157 mm |
| Width | 75 mm |
| Height | 77 mm |
| Mounting height | 77 mm |
| Cut-out size | 112 × 56 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for cable entry systems: | KEL-ER 24, KEL-U 24, KEL 24, KEL-DPU 24, KEL-DPZ 24 |
| Part No. | 48300 |
| EAN | 4251269334641 |
| Package quantity | 1 |
| Mounting options | Screw type mounting, Snap-in |
| Length | 157 mm |
| Width | 75 mm |
| Height | 77 mm |
| Mounting height | 77 mm |
| Cut-out size | 112 × 56 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6 mm |
| Suitable for cable entry systems: | KEL-DP 24 B |
Convince yourself of the simple and time-saving assembly of our products.
Watch the assembly video!
Always find the right size and the right cable grommets for your cable entry!
Rectangular & square knockout punches for heavy multi-pin industrial connectors and many icotek cable entry components.
KT grommet based cable entry for standard cut-outs of heavy industrial connectors. Available as single or double row version.
KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Available as single or double row version.
Classic KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Also available as multi-row versions.
Cable entry plate with high cable density and certified protection IP65. Cables can be fed through from both sides.
Heavy duty cable entry plate with high strain relief and certified protection up to IP68 / UL Type 4X*.
Cable entry plate with high cable density and certified protection IP66 / UL Type 12. Available in various sizes.
Cable entry plate for tool-less plug-in assembly. Certified sealing rates IP64 / UL Type 12.
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
KT grommet based bulkhead for 90° preassembled cable transit for cable diameters up to 35 mm and a large bending radius (r max. = 150 mm).
With the distribution box, centrally routed cables (with and without connectors) can be distributed 360° in all desired directions.
KT grommet based split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Metric thread sizes M32 / M50.
Toolless snap-in mounting frames for KEL, KEL-U and KEL-QUICK.
Holders for hook-and-loop cable ties and tapes. Various mounting types.
EMC cable clamps for direct mounting via screws, e.g. on metal sheets.
